R Type Pressure Reducing Valve
Home > Pressure control valve > Pressure Reducing Valve RG‧RT series > R Type Pressure Reducing ValveModel RT-03
Feature:- Pressure Reducing Valve Type of hydraulic machines are used for main system pressure and also other system pressure which must below the main system. For this function, Pressure Reducing Valve cannot be acted by solenoid valves, so it must act via R Type Pressure Reducing Valves so then it could achieve the pressure reducing purpose.
- The twin pressure reducing type of hydraulic circuit includes check valves and it is designed at P port of solenoid valve.
- These valves are used to limit the pressure in a part of the circuit to something lower than that required in the main circuit. The valves may be controlled by pilot pressure from a remote control port.
- Pressure Reducing Valve of hydraulic machines are available with integral check valves for use when free reverse flow from the secondary port to the primary port is required.
Description of each model code:
Model Number: RT-03-1-10
|
Model code |
Descriptions |
1- |
R |
Series Number R Type Pressure reducing valves |
2- |
T |
Type of Mounting T: Thread type G: Gasket type |
3- |
03 |
Port Size 03:3/8” 06:3/4” 10:1-1/4” |
4- |
1 |
Pressure Adj. Range 1:7-70kgf/cm2 2:10-140kgf/cm2 3:15-250kgf/cm2 |
5- |
10 |
Design Number |
Specification Table
Model Numbers |
Max. Pressure |
Pressure Adj. Range |
Max. Flow |
Weight kg |
Bolt Size |
||
Thread type |
Gasket type |
kgf/cm2 |
kgf/cm2 |
l/min |
RT- |
RG- |
RG- |
RT-03 |
RG-03 |
250 |
1: 7-70, 2:10-140, 3:15-250, |
50 |
4.5 |
4.5 |
M10x55x4pcs |
RT-06 |
RG-06 |
125 |
7.1 |
7.1 |
M10x55x4pcs |
||
RT-10 |
RG-10 |
250 |
13.1 |
13.1 |
M10x55x6pcs |